Due to high demand, this product may require longer processing time.
The Micro Voltmeter is a great way to keep an eye on your battery's voltage level with the smallest footprint possible. Just plug into any P-Tap source for an instant readout.
The Micro Voltmeter is housed in a tiny carbon fiber-nylon composite printed enclosure that measures 1.92" x 0.62" x 0.55" (48.9 x 15.7 x 14 mm). It features 3-30V operation, a 0.28" blue LED display, and an attached 18" cabled P-Tap connector.
The Micro Voltmeter uses our very strong, small, and flexible cable that is approximately 0.1" (2.5mm) in diameter, and it is very difficult to cut.
The Micro Voltmeter attaches to your rig via 4-way 1/4-20 through-hole for limitless viewing angles! It's also light enough to attach with Velcro or tape!
The Micro Voltmeter comes factory-calibrated, but can be adjusted with a 1/16" (1.5mm) Slotted screwdriver.
All Rencher Industries products that use printed parts carry a 5-year warranty on the printed material. If your printed part warps, cracks, or fails for any reason, we will replace the defective printed part at no cost. Made in the USA.
CanadaDoes what it says. Wish there was a way to dim the light. Very bright. Can only read straight on. Off side of it the numbers aren’t readable.
Judging from your photo, it looks like you are in bright sunlight, which any display will have a hard time competing with. The display is very bright as you said, but it's hard to make a balance where it is visible in all conditions. ND gel can be used to cut down the brightness in the studio, either on the outside of the case with tape, or we can provide instructions on how to add ND gel to the inside of the case.
United StatesGreat little meter that works very well. After buying one for our A camera, I can't wait for more to get them as crew gifts for the camera department.
SpainAll correct with the shipping, all good with the experience. I love to know the status of the battery at all time. Thanks
CanadaJust received my voltage meters today and I’m thoroughly impressed by the design and ease of use! I hope that the logic blocks will be printing soon. I wanna make some more purchases! Great stuff!
GermanyI definitely will buy more equipment from Rencher Industries after this experience. Nice, solid work, very reliable. Thanks a lot! AAA+++++